67 Laminate Flooring Underlayment:Type to Buy, Basics, Usage, Cost

Laminate Flooring Underlayment:Type to Buy, Basics, Usage, Cost

 |  ❤ 212  |  ☻ 0
Category: Flooring & Stairs
  1. 5
  2. 4
  3. 3
  4. 2
  5. 1
(1 voice, average: 5 out of 5)

Laminate Flooring Underlayment:Type to Buy, Basics, Usage, Cost

Laminate underlayment is a thin layer of foam or felt that installs under laminate floorboards. It helps the installation by smoothing out minor imperfections in the subfloor. Underlayment is considered an essential part of flooring with laminate. In fact, manufacturers consider it to be so imporant that some laminate comes with the underlayment pre-attached to the bottom.

Which to Buy

Underlayment comes in long, narrow rolls of about 100 square feet (for example, 44 inches wide by 27.3′ feet long) and around 3 mm thick.

Light Foam: About half the cost of felt, polyethylene foam is the cheapest underlayment you can buy. At 1.5 pounds per 100 square feet, this 3 mm thick foam underlayment smooths the subfloor but does little to absorb sound.

Heavy Foam: Heavier, more expensive closed-cell foam underlayment. At 2.2 pounds per 100 square feet, this material has better sound absorption qualities as opposed to the lighter foam but does not approach felt’s heaviness.

Felt: Recycled fibers compose felt underlayment. This 3 mm thick underlayment has a heavier, more cloth-like feel and tends to smooth down better than foam underlayment. Weighing 12.5 pounds per 100 square feet, felt underlayment is over 450 percent heavier than foam. Denser, heavier materials tend to absorb sound better.

READ  Best to Worst: Grading 13 Basement Flooring Ideas

Good felt underlayment is considered, by many flooring professionals, to be the gold standard in underlayments.

Purpose of Underlayment

Unlike solid hardwood flooring or even engineered wood flooring, laminate is very thin and lacking in solidity.

In other words, it needs help. As a result, you need to provide extra cushioning and sound absorption properties to your laminate.

Without underlayment, your new floor will be harder on your feet. Noises will more easily transmit to floors below, as well as within the room where the laminate is located.

But the main purpose of underlayment is to provide a smooth, flat surface, reducing subfloor imperfections that may “telegraph” to the flooring surface. To summarize, laminate underlayment:

  • Provides your floor a bit more thermal insulation.
  • Bridges minor gaps that subfloors or existing floors have.
  • Absorbs some sound.
  • Makes it easier to walk on.
  • Acts as a vapor barrier.

Laminate Flooring With Pre-Attached Underlayment:

Some laminate flooring, such as Pergo Accolade and DuPont RealTouch, has underlayment already attached to the bottom of the floorboards.

With these types of floors, it is not only unnecessary to add underlayment–the quality of your installation will be detrimentally affected if you added a second layer of underlayment. You will end up with a floor that is too squishy and does not wear well.

Do You Really Need It?

In some cases, underlayment will not make an appreciable difference in your end result.

If laying laminate on a smooth wood subfloor, the inclusion of underlayment will not make the floor warmer or quieter. If anything, underlayment may give the laminate a mushy “laminate floor” feeling. It’s a feeling that real solid wood flooring does not have.

READ  How to Clean Linoleum Floors

Laminate foam underlayment is not particularly expensive. But if you’re trying to cut costs to the absolute bare minimum, not installing underlayment may cut the project cost by about 15 to 20 percent.

Not Meant As Primary Moisture Barrier

Be sure to check product specifications. If you are laying laminate over concrete, for example, you need a vapor or moisture barrier. Check product specifications to see if the underlayment will act as a vapor barrier.

Not For Warmth: For That, Try Radiant Heating

Even though underlayment can help make laminate feel warmer, it will not do much to help excessively cold floors, such as basements located in chilly climates.

For this, install electric radiant heating mats under the laminate. Radiant heating is approved for most types of laminate.

Installation Tips

  1. Sizing: Make sure that the underlayment is at least as long as your room. This helps you avoid unnecessary seams. For example, if your floor is 25 feet by 25 feet, purchase underlayment in 30 foot long rolls or longer.
  2. Seams: Length-wise seams are unavoidable. These seams are held in place either by self-adhesive on the underlayment itself or separately with tape.

Note on Terminology

Within flooring, there are two materials that go by the same name of “underlayment.” The focus of this article is the soft kind described above. Another material, not covered here, is thin plywood or fiberboard, usually about 1/4 inch thick which is also called underlayment.

Leave a Reply

Your email address will not be published. Required fields are marked *

one × two =